Reference Signal For The Servo System - Sony MSW-A2000 Operation Manual

3-2 Reference Signals for Video Output and Servo System

3-2-2 Reference Signal for the Servo System

The VTR automatically selects either the input video
signal or the output from the internal reference video
signal generator as the reference signal for the servo
Is a signal input to
the connector selected
with the VID.IN setting?
Yes
Lock the servo to the input
video signal selected with
VID.IN setting.
3-6
Chapter 3 Preparations
system. Which of the two signals is selected depends
on the operational status of the VTR, as shown in the
following flowchart.
Start
(for other than MSW-M2000E/
M2000EP)
Yes
SDTI-CP input?
No
EXT
Setting of setup
menu item 309?
AUTO1
AUTO2
INPUT
Setting of OUTREF?
REF
Currently
Yes
recording or
editing?
No
Is a signal input to
No
the REF. VIDEO
INPUT connector?
Yes
Synchronize to the reference
video signal input to the REF.
VIDEO INPUT connector.
Start
(for MSW-M2000E/2000EP)
No
NETWORK button lit?
Yes
No
No external synchronization