Connecting The Am Antenna; Connecting The Fm Antenna - JVC MX-V508T Instruction Manual

CAUTION: Make all connections before plugging the Unit into an AC power outlet.
1
Note: Even when an outdoor AM Antenna is used, keep the indoor AM Loop Antenne connected.
Using the Supplied FM Wire Antenna
Using a 75Ohm FM Wire Antenna (Not Supplied)
If reception is poor, connect the outside antenna.
Before attaching a 75-ohm coaxial lead (the kind with a round wire going to an outside antenna), disconnect the supplied FM
Wire Antenna.
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
4

Connecting the AM Antenna

AM Antenna Wire (not supplied)
AM Loop Antenna
2 3

Connecting the FM Antenna

FM Wire Antenna
Outside FM Antenna Wire
1
cord and the AC power cord.
If reception is poor, connect the outside antenna.
Turn the loop until you
have the best reception.
Extend the supplied FM Wire Antenna
horizontally.
2
3
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.