Basic Of Using The Cd Player; Continuous Play; To Play A Discs - JVC MX-V508T Instruction Manual

Basics of Using the CD Player –

Continuous Play

Unit/Remote Control
1
2
3
4
1
2
7
3
4
5
To Play a Disc
Steps
1. Insert a disc into one of the disc trays.
On the Unit
1. To Play:
Press the SELECT CD (6) or DISC
(1-3) buttons of the disc you want to
play.
2. To Stop:
Press the ( ) RETURN (7) STOP
button for the disc being played.
3. To Stop and Remove the disc:
For both the Unit and Remote Control,
press the (0) button.
4. To Pause:
Press the SELECT CD (6) button
while playing.
5. To Cancel Pause:
Press the SELECT CD (6) button
again.
On the Remote Control
1. To Play:
Press (3 3 3 3 3 ) SELECT button or the DISC
(1-3) buttons.
2. To Stop:
Press the ( ) RETURN (7) button.
3. To Stop and Remove the disc:
Press the (0 0 0 0 0 ) button.
4. To Pause:
Press the (8 8 8 8 8 ) STILL button.
5. To Cancel Pause:
Press (3 3 3 3 3 ) SELECT button.
Explanation/Remarks
1. If a Video CD is inserted, "VIDEO CD" will appear in
the display.
Note :
• If the CD can't be read correctly (due to scratches,
misalignment etc.) "01 00:00" appears on the display.
2. The first track of the selected disc will begin playing.
3. The CD Player automatically searches next tray when
playback finishes the last track of the CD.
4. If the PLAY button is pressed while the tray is open,
the tray is automatically closed and playback begins.
5. When Pausing the CD, the Disc playing time will blink.
6. When resuming a Paused CD, play continues from the
point where it was paused.
17