Timer Operations; Setting The Timer - JVC Micro Component System UX-GB9DAB Instructions Manual

Remote control
STANDBY/ON
CLOCK/
TIMER

Setting the Timer

Using Daily Timer, you can wake up with your favorite
music.
• You can store three Daily Timer settings; however, you can
activate only one timer at a time.
• To exit from the timer setting, press TIMER as required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
Daily Timer initial settings when shipped from the factory
• Daily 1: ON Time (6:00)/Source (TUNER)/
Volume level (8)
• Daily 2: ON Time (7:00)/Source (TUNER)/
Volume level (8)
• Daily 3: ON Time (10:00)/Source (TUNER)/
Volume level (8)

Timer Operations

SET/
ANT.P.
CANCEL
PRESET/GROUP/PTY
DOWN,UP
Remote
ONLY
1
Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, or Daily 3 ON time.
Daily Timer 1
CLOCK/
DAILY 1 ON (Time)
TIMER
Canceled
S.TURBO
QP Link
Ex. When Daily Timer 1 setting mode is selected
• When the clock has not been adjusted, pressing TIMER
makes the System enter the clock setting mode.
2
Make the Daily timer setting as you want.
1 Set the hour then the minute for on-time.
PRESET/GROUP/PTY
DOWN UP
2 Select the playback source—"TUNER," "CD,"
"DAB," or "AUX."
PRESET/GROUP/PTY
DOWN UP
S.TURBO
QP Link
3 Select the volume level.
PRESET/GROUP/PTY
DOWN UP
• You can select the volume level ("VOLUME 1" to
"VOLUME 40" and "VOLUME – –"). If you select
"VOLUME – –," the volume is set to the last level
when the unit has been turned off.
Daily Timer 2 Daily Timer 3
DAILY 2 ON (Time) DAILY 3 ON (Time)
Clock setting
(see page 11)
1
SET
ANT. P.
SET
ANT. P.
1
SET
ANT. P.
Continued on the next page...
20