Timer Operations; Setting The Timer - JVC SP-UXP400 Instructions Manual

Remote control
PRESET
UP/DOWN
* Daily Timer initial settings when shipped from the
factory
•Daily 1: ON Time (6:00)/Source (TUNER)/
Volume level (8)
•Daily 2: ON Time (7:00)/Source (TUNER)/
Volume level (8)
•Daily 3: ON Time (10:00)/Source (TUNER)/
Volume level (8)

Timer Operations

Setting the Timer

Using Daily Timer, you can wake up with your favorite
song. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
one of Daily Timers and Recording Timer at the same time.
STANDBY/ON
• To exit from the timer setting, press CLOCK/TIMER as
required.
CLOCK/
• To correct a misentry during the process, press CANCEL.
TIMER
You can return to the previous step.
SET
1
4/¢
Select one of the timer setting modes you want to set—
CANCEL
Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or
Recording Timer ON time.
CLOCK/
TIMER
Ex. When Daily Timer 1 setting mode is selected
2
Make the timer setting as you want.
For Daily Timers:
1 Set the hour then the minute for on-time.
2 Select the playback source—"TUNER," "CD," or
Remote
ONLY
Daily 1 Timer Daily 2 Timer
Daily 1* ON (Time) Daily 2*
Canceled Clock setting
(see page 13)
1
"TAPE."
1
Daily 3 Timer
ON (Time) Daily 3* ON (Time)
ON (Time)
REC
Recording Timer
SET
SET
19