Timer Operations - JVC UX-G60 Instructions Manual

Remote control
CANCEL
,
SHIFT
29

Timer Operations

Setting the Timer
Using Daily Timer, you can wake up with your favorite
music.
You can store three Daily Timer settings; however, you can
activate only one of the timers at the same time.
• To exit from the timer setting, press CLOCK/TIMER
AUDIO
(while holding SHIFT) as required.
CLOCK/TIMER
• To correct a mis-entry during process, press CANCEL
(while holding SHIFT). You can go back to the previous
step.
ENTER/SET
Daily Timer initial settings when shipped from the
factory
• DAILY 1: ON Time (6:00)/OFF Time (8:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 2: ON Time (7:00)/OFF Time (9:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 3: ON Time (10:00)/OFF Time (12:00)/
Source (TUNER FM 1)/Volume level (– –)
1
Select one of the timer setting modes you want to set—
DAILY 1 ON time, DAILY 2 ON time, or DAILY 3
ON time.
Ex. When Daily Timer 1 setting mode is selected
• When the clock has not been set, pressing CLOCK/
2
Make the timer setting as you want.
Repeat the procedure for the following settings until
finished—
Remote
ONLY
CLOCK/TIMER
6
(while holding...)
Daily Timer 1 Daily Timer 2
ON (Time) DAILY 2
DAILY 1 ON (Time)
Canceled
(see page 14)
QP Link S V C D V D MP3 WMA 3DPHONIC
S.TURBO AHB PRO USB MIC V.MASK C.VOICE
PRGR. B.S.P. BONUS PRGM RND 1
TIMER (while holding SHIFT) makes the System enter
the clock setting mode.
PTY PTY
INFO
Daily Timer 3
DAILY 3
ON (Time)
Clock setting
L-BANDIII AM FM
ST MONO
PG PL
1 2 3
TA NEWS INFO
REC
SLEEP
A.STBY
REC
ENTER/SET