3 3 3 3
Speakers
To connect the speaker cords
Make sure that both speakers are connected correctly and
firmly.
1 Hold
2 Insert
Red
Black
Red
• When connecting the speaker cords, match the polarity of
the speaker terminals: red cord to (+) and black cord to (–).
• If the speaker cords are covered with vinyl, remove the
vinyl to expose the tip of the speaker cord by twisting the
vinyl.
• DO NOT connect more than one speaker to
each terminal.
• DO NOT allow the conductor of the speaker
cords to be in touch with the metallic parts of
the System.
To remove the speaker grilles:
Holes
5
3 Release
From left speaker
From right speaker
Projections
Speaker
grille
To connect a portable audio device
DOWN
UP
PHONES
Stereo mini plug cord
(not supplied)
Portable audio device
• By using QP Link (Quick Portable Link), you can easily
start playing back a portable audio device on this unit. See
page 9 for details.
• If an external device is not equipped with a stereo mini plug
audio output, use a plug adapter to convert the stereo mini
plug to the corresponding plug of the audio output.
Preparing the remote control
• Dispose of batteries in the proper manner, according to
federal, state, and local regulations.
DO NOT recharge, short, disassemble, heat
the battery or dispose of it in a fire.
When using the remote control
Point the top of the remote control toward the remote sensor
as directly as possible. If you operate it from a diagonal
position, the operating range (approx. 5 m) may be shorter.
AUX jack
AUX
R03(UM-4)/AAA(24F)