Timer Operations; Timer Playback - JVC UX-C7 Instruction Manual

UX-C7 B/E/G/GI/EN |
{ TIMER OPERATIONS
Timer recording of broadcast
® The current time must be set correctly before you set
timer recording.
® Make sure that the erase protection tabs of the
cassette have not been broken off.
Operations
1. Set the POWER button to ON.
2. Load a cassette.
e Insert the cassette with the side to be recorded
facing out.
e Set the reverse mode buttonto" 2 "or" 3) "
and set the DOLBY NR button as required.
3. Set the timer start and stop times, set the timer
recording mode, in this order. (Refer to "Setting the
timer" on page 42.)
e Set the timer about a minute before the broadcast to
be recorded is scheduled to start.
. Tune to the station to be recorded. (Refer to page 32.)
. Adjust the volume.
. Set the POWER button to STANDBY.
Ooh
© Timer recording will start at preset start time and
the power will be switched off at preset stop time.
(The timer mode is then released.)
® To cancel timer operation
Press the timer (©)) ON/OFF button while pressing the
SHIFT button so that the timer mode display (©)) goes
out.
If you do this, timer recording will not start at the timer start
time.
Notes:
Once the timer has been set, the start and stop times,
etc., are stored in memory. When timer recording or
playback is required at different times, the timer must be
set again.
Timer playback
© Timer playback of tapes, broadcasts and CDs is
possible.
Operations
mo ©
3g TR REPEAT oes ic be
i (aisle ia Dae
& mom 7
(CLOCK), | (@TIMER)I
5 Seale ee a
@ Set the POWER switch to ON.
@ Set the timer start and stop times, set the timer
playback mode, in this order. (Refer to "Setting the
timer" on page 42.)
22 (No. 1898)
ee
aciones
AUTO REVERSE
@ Timer playback of a CD is possible in programmed
order. (See page 26.)
Operations
Load a disc
Load cassette tape
© Tune to the required frequency when the timer playback
of a broadcast is to be performed.
© Adjust the volume.
© Switch the power off.
© Timer playback will start at the timer start time and the
power will be switched off at the timer stop time.
The unit remains in the same timer mode even after the
power is switched off and the same timer function will: be
repeated at the same time on the. following day.
e To cancel timer operation
Press the timer ( ©) ) ON/OFF button while pressing the
SHIFT button so that the timer mode indicator ( © )
disappears.
Note:
© To stop during timer playback, press the POWER button
to switch the unit off.