Playing Back A Portable Audio Device - JVC Micro Component System UX-GB9DAB Instructions Manual

To select a track
Increases the track numbers.
Decreases the track numbers.
To select a group (MP3 only)
1
While disc play is stopped, activate the group select
mode.
MP 3
S.TURBO
PTY SEARCH
QP Link
MP 3
S.TURBO
QP Link
2
Select a group number.
Group number and group name appear.
To locate a particular portion
While playing a disc, press and hold until the portion you
want is reached.
PRESET/GROUP/PTY
DOWN UP
Fast-forwards the track.
Fast-reverses the track.
To locate a track directly
1
Activate the track number entry mode.
• For regular CDs
NUMBER
SELECT
• For MP3 discs
2
Enter a track number you want to play back.
PRESET/GROUP/PTY
DOWN UP
9
Track select
mode
Group select
mode
Increases the group numbers.
Decreases the group numbers.
Remote
ONLY
Remote
ONLY
S.TURBO
QP Link
MP 3
S.TURBO
QP Link
SET
ANT. P.
Increases the
numbers.
Decreases the
numbers.
To select track numbers on an MP3 disc, enter the
number in three digits. Refer to the following examples:
When selecting track 24...
1 Press SET to skip the first digit.
2 Select "2" for the second digit pressing UP or DOWN
button repeatedly, then press SET.
3 Select "4" for the last digit pressing UP or DOWN
button repeatedly, then press SET or CD 6.
If you enter a track number that does not exist on the MP3
disc...
• During playback, your entry will be ignored and
playback will continue with the current track.
• While playback is stopped, disc playback will remain at
the first track in the first group until you press CD 6,
then playback will start.
• To go back a step, press CANCEL.

Playing Back a Portable Audio Device

By using QP Link (Quick Portable Link), you can easily start
playing back a portable audio device connected to the AUX
jack.
• Make sure to set the volume of your portable audio device
loud enough so that the System can detect the sound signal.
To activate QP Link
QP LINK
When QP Link is activated, connecting a portable device to
the AUX jack and starting playback performs the following:
• While listening to another source...
Changes the source to AUX automatically. (If you change
from AUX to another source, QP Link will be canceled.)
• While the System is on standby...
Turns on the System and activates the AUX source
automatically (except when the display is turned off).
S.TURBO
QP Link
While QP Link plays back the device...
S.TURBO
QP Link
Remote
ONLY
QPL ON
(Initial setting)
QPL OFF
Bubbles appear when
QP Link works.
Bubbles disappear when the
sound signal stops or is too
weak.