Related Manuals for JVC UX-GP7V
Summary of Contents for JVC UX-GP7V
-
Page 1: Micro Component System
MICRO COMPONENT SYSTEM UX-GP7V —Consists of CA-UXGP7V and SP-UXGP7V SUPER VIDEO INSTRUCTIONS GVT0258-005A [US/UN/UB/UG/UX/A/UH]... - Page 2 Warnings, Cautions and Others CAUTION button in any position does not disconnect the mains line. Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Page 3 Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3.
- Page 4 Introduction Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the System. Precautions How to Read This Manual • Button and control operations are explained in the table Installation below.
-
Page 5: Table Of Contents
Changing the Picture Tone ..........17 Optical Digital Out Signals ..........40 Setting the Clock ..............18 Operating JVC’s TVs Using the Remote Control ... 40 Turning Off the Power Automatically ......18 Specifications ............... 41 Unique Video Disc/File Operations ......19 Parts Index ............. - Page 6 Note on Region Code Playable Disc/File Types DVD players and DVDs have their own Region Code numbers. This System can play back only DVDs with an appropriate Region Code number. • For details, see “Specifications” on page 41. • “RG ERROR” appears if DVD with other Region Code is loaded.
-
Page 7: Connections
Connections INFO Do not connect the power cord until all other Supplied accessories connections have been made. Check to be sure that you have all the following items. • FM antenna (×1) • Connect VIDEO OUT directly to the video input of your •... - Page 8 Ÿ AM/FM antenna Speakers • When connecting the speaker cords, match the polarity To assemble the AM loop antenna of the speaker terminals: red to (+) and black to (–) Press and hold To connect AM/FM antenna AM loop antenna (supplied) Turn it until the best reception is obtained.
-
Page 9: Preparing The Remote Control
⁄ To connect the powered subwoofer When connecting an iPod On the front panel Apple iPod (separately purchased) From the powered subwoofer (not supplied) The connected subwoofer can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals encoded in multi-channel Dock adapter (supplied with software. -
Page 10: Display Indicators
Display Indicators The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicators illuminate on the display. 1 iPod indicator q FM reception indicators •... -
Page 11: Daily Operations-Playback
Daily Operations— Playback In this manual, operations using the remote control Turn on the power. are mainly explained; however, you can use the buttons The STANDBY lamp on the main unit turns off. and controls on the main unit if they have the same (or •... -
Page 12: Listening To The Radio
To select the band (FM or AM) How to select a number Examples: To select number 5, press 5. To select number 10, press 10. To select number 15, press 10, 1, then 5. To tune in to a station To select number 30, press 10, 3, While FM or AM is selected... -
Page 13: Playing Back A Disc
Playing Back a Disc Select a preset number for the station you store. INFO • To select a number, see “How To insert a disc Main Unit to select a number” on page 9. ONLY • When using an 8 cm disc, place it on the inner circle of the disc tray. - Page 14 Remote Remote To select the file type To locate an item directly ONLY ONLY • For details, see page 33. You can select a title/chapter/track/file directly and start playback. • For DVD Video, you can select a title before starting playback, while you can select a chapter after starting playback.
-
Page 15: Playing Back An Apple Ipod
Playing Back an Apple iPod INFO To fast-forward/reverse the track/file JVC is not responsible for any loss of or damage to While playing... iPod that might result from the use of this System. To stop searching, release the button. -
Page 16: Playing Back A Digital Audio Player
Main Unit ONLY Shuffle Songs To change the charge mode • “SHUFFLE” appears on the display for a while. • The shuffle icon lights up on the display/screen of the iPod. To cancel, press TUNER/PLAY MODE again until the The battery in the iPod is charged through P.ON shuffle icon disappears. -
Page 17: Daily Operations-Sound & Other Adjustments
Daily Operations— Sound & Other Adjustments Adjusting the Volume Remote control You can adjust the volume level from “VOL MIN” (level 0) to “VOL MAX” (level 40). Remote control: Main unit: Remote ONLY To drop the volume in a moment To restore the volume, press again, or adjust the volume level. -
Page 18: Creating A Soothing Tone For Your Ear -My Sound
Remote To adjust the tone ONLY MY SOUND You can adjust the bass and treble level from –3 to +3. To adjust the bass SELECT START AND PRESS THE ENTER KEY TO START MEASUREMENT START EXIT Canceled To adjust the treble MY SOUND MEASURING... -
Page 19: Creating 3-Dimensional Sound Field-3D Phonic
To exit MY SOUND setup Presetting Automatic DVD Sound Remote Increase Level ONLY DVD sound is sometimes recorded at a lower level than other discs and sources. You can set the increase level for the currently loaded DVD, so you do not have to adjust the Remote To select the preset MY SOUND ONLY... -
Page 20: Changing The Color System And Scanning Mode
Changing the Color System and Scanning Select a preset picture tone. Mode Remote INFO Remote ONLY ONLY You can select the video output to match it to the color system of your TV (NTSC or PAL). • If you connect a progressive TV through the VIDEO OUT (COMPONENT) jacks, you can enjoy a high quality picture by selecting progressive scanning mode. -
Page 21: Setting The Clock
Turning Off the Power Remote Setting the Clock ONLY INFO Remote Automatically ONLY Without setting the built-in clock, you cannot use Daily Timers (see page 30). Auto Standby • To exit the clock settings, press CLOCK/TIMER as • This only functions while playing a disc. required. -
Page 22: Unique Video Disc/File Operations
Unique Video Disc/File Operations Remote Selecting the Audio Track ONLY INFO Remote control For DivX files/DVD Video: While playing back a chapter/ file containing several audio languages, you can select the language to listen to. DVD/CD 6 For DVD-VR/SVCD/VCD: While playing back a track, you can select the audio channel to listen to. -
Page 23: Selecting The Subtitle Language
While playing a DVD-VR... Selecting the Subtitle Language Remote ONLY For DivX files/DVD Video: While playing back a chapter/ file containing subtitles in different languages, you can select the subtitle language to display on the TV. For DVD-VR: While playing, you can turn the subtitles on or off. -
Page 24: Special Effect Playback
Special Effect Playback To replay the previous scenes INFO Remote ONLY (One-Touch Replay) Still picture playback • This function is only used while playing DVD Video/ DVD-VR. To display the still picture: While playing... While playing..The playback position moves back about 10 seconds before the current position (only within the same title for DVD Video). -
Page 25: Advanced Playback Operations
Advanced Playback Operations Programming the Playing Order Remote control Remote —Program Play ONLY INFO You can arrange the playing order of the chapters/tracks/ files (up to 99) before you start playback. • Program play cannot be used for DVD-VR and JPEG/ MPEG-1/MPEG-2/DivX files on a disc. -
Page 26: Playing At Random-Random Play
To check the programmed contents Playing at Random Remote Before or after playback... —Random Play ONLY In the reverse order. You can play all chapters or tracks at random. • Random Play cannot be used for DVD-VR and JPEG/ MPEG-1/MPEG-2/DivX files on a disc. Before starting playback, activate Random Play. -
Page 27: Playing Repeatedly
Remote Playing Repeatedly INFO ONLY Repeats the current chapter. REP CHAP * • For DVD Video/DVD-VR/SVCD/VCD/CD: You can REP TTL Repeats the current title. also select the repeat mode using the on-screen bar (see Repeats the current track/file. REP TRK * pages 26 and 27). -
Page 28: On-Screen Operations
On-Screen Operations Remote control TIME 0:00:58 CHAP TRACK 3 TOTAL 1:25:58 TITLE PROGRAM TIME TIME DVD/CD 6 Number TIME 0:00:58 TITLE CHAP TRACK 3 TOTAL 1:25:58 RANDOM buttons TIME TIME MPEG-1/MPEG-2/DivX files on a disc Time 00:00:58 CHAP TOTAL 1:25:58 FILE ON SCREEN 1 Disc/source... - Page 29 To operate using the On-screen Bar To change the time information Ex.: Selecting a subtitle (French) for DVD Video You can change the time information on the on-screen bar and the display on the main unit. While “DVD/CD” is selected as the source... While playing, display the entire on-screen bar.
- Page 30 Select the repeat mode you want. Select the end point (B). A-B Repeat starts. The selected Repeats a desired portion (see below). portion plays repeatedly. Repeats the current title. TITLE* • You can search for the end point using the ¡ button. Repeats the disc (not applicable for DVD) or programmed track.
-
Page 31: Control Screen Operations
Ex.: When Original Program is selected. Chapter Search For DVD Video/DVD-VR: You can search for the chapter ORIGINAL PROGRAM number to play. No Date Time Title • This function is not available during Program Play and 1 03/12/08 12:15 La fleur Random Play. - Page 32 Control screen for MP3/WMA/WAV/JPEG/MPEG-1/ To move the highlight bar between group list and file list MPEG-2/DivX files Moves the bar to the file list. The control screen appears on the TV when the System detects MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX files on the loaded disc. Moves the bar to the group list.
-
Page 33: Daily Timer Operations
Daily Timer Operations Remote Setting the Daily Timer ONLY INFO Remote control Using Daily Timer, you can wake up with your favorite music. AUDIO You can store three Daily Timer settings; however, you can activate only one of the timers at any one time. •... - Page 34 1 Set the hour then the minute for on-time. To turn on or off the Daily Timer 2 Set the hour then the minute for off-time. Since Daily Timer is activated at the same time everyday, 3 Select the playback source—“TUNER-FM,” you may need to cancel it on some particular days.
-
Page 35: Setup Menu Operations
Setup Menu Operations INFO Remote Initial Settings ONLY Remote control You can change the settings of the System. • The Setup Menu can be used only when “DVD/CD” is selected as the source. Press SET UP while playback is stopped. LANGUAGE SET UP MENU LANGUAGE... - Page 36 Menu Item Contents You can obtain optimal picture quality by selecting the source type of the video PICTURE SOURCE source. AUTO: Normally, select this option. The System recognizes the picture type (film or video source) of the current picture according to its information. FILM: For a film source picture.
-
Page 37: Additional Information
* <.mod> is an extension code used for the MPEG-2 files Playing Back a Disc: recorded by JVC Everio camcorders. The MPEG-2 files • When you change the source to “DVD/CD,” it may take a with the <.mod> extension code cannot be played back if while to activate the source. - Page 38 • For DivX playback... • Sound distortion may occur when playing back audio – This System can play only a disc of UDF-Bridge format. sources with high recording levels. When distortion “Multi-border” is not supported. occurs, it is recommended to turn off the equalizer of the –...
- Page 39 Unique Video Disc/File Operations (see pages 19 Setup Menu Operations (see pages 32 and 33) to 21) General: • If the upper and lower parts of the menu are cut off, Selecting the Audio Track: adjust the picture size control of the TV. •...
-
Page 40: Troubleshooting
Groups and tracks are not played back as you expect. Troubleshooting ] The playing order is determined when the groups and tracks were recorded. It depends on the writing General application. Adjustments or settings are suddenly canceled before you finish. MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2 or DivX ] There is a time limit. -
Page 41: Maintenance
• Manufactured under license from Dolby Laboratories. “Dolby”, Maintenance “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. To get the best performance of the System, keep your discs • “DTS” is a registered trademark of DTS, Inc. and and mechanism clean. -
Page 42: Language Code List
Language Code List Afar Scots Gaelic Maori Shona Abkhazian Galician Macedonian Somali Afrikaans Guarani Malayalam Albanian Ameharic Gujarati Mongolian Serbian Arabic Hausa Moldavian Siswati Assamese Hindi Marathi Sesotho Aymara Croatian Malay (MAY) Sundanese Azerbaijani Armenian Maltese Swedish Bashkir Interlingua Burmese Swahili Byelorussian Interlingue... -
Page 43: Optical Digital Out Signals
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL OUT terminal if the discs are not copy-protected. Operating JVC’s TVs Using the Remote Control You can use the remote control to operate JVC’s TVs. Remote control TV/VIDEO Change the input mode. -
Page 44: Specifications
Specifications Playable disc: • DVD Video/CD/VCD/SVCD • CD-R/CD-RW (CD/SVCD/ Amplifier section—CA-UXGP7V VCD/MP3/WMA/WAV/ JPEG/MPEG-1/MPEG-2/ 60 W (30 W + 30 W) at 4 Ω Output Power: DivX format) (10% THD) • DVD-R/-RW (DVD-VR/ Audio Input: AUDIO IN: Stereo min. DVD Video/MP3/WMA/ (∅... -
Page 45: Parts Index
S.TURBO II SUBTITLE 20, 37 TOP MENU/PG 11, 28, 29 This remote control can also operate TUNER 8 – 10 JVC’s TVs (see page 40). TUNER/PLAY MODE 9, 13, 22, 23 TV CH UP, DOWN TV/VIDEO Main unit ZOOM Main unit... - Page 46 © 2008 Victor Company of Japan, Limited 0908WMKMDWJMM...