Display Power - Raymarine A Series Installation And Operation Instructions Manual

6.1 Display power

Powering the display on
1. Press the POWER button on the display.
2. Select Accept to acknowledge the disclaimer
message.
Powering the display on
1. Press the POWER button.
2. Press the OK button to accept the disclaimer
message.
Powering the display off
1. Press and hold the POWER button until the
countdown reaches zero.
Note: If the POWER button is released before
the countdown reaches zero, the power off is
cancelled.
PowerSave mode
In PowerSave mode all functions of the multifunction
display remain active, but the unit is placed into
a low power state. The LED lights around the
Rotary controller will blink once every 1.5 seconds
to indicate that the unit is in PowerSave mode.
PowerSave mode is cancelled by pressing a physical
button or when an alarm event occurs.
Note: To ensure user safety the PowerSave
feature will not be available if:
• any connected radars are switched on
• the multifunction display is providing autopilot
control in a system without a dedicated pilot
head and the autopilot is engaged.
Attention Leaving an MFD in PowerSave mode
will continue to consume some power from your
vessel's batteries. The unit could drain your batteries
if left in PowerSave mode for prolonged periods of
time. When switching off the power to your vessel,
ensure that the unit is powered off using the power
button. For more information on the amount of power
consumed by the unit in PowerSave mode, refer to
Chapter 31 Technical specification.
Enabling PowerSave mode
To enable PowerSave mode follow the steps below.
1. Ensure any radars connected to the system are
switched off.
2. Press the POWER button.
The shortcuts menu is displayed.
3. Select PowerSave Mode.
The multifunction displays is now in PowerSave
mode.
88
4. You can wake the unit from PowerSave mode
at anytime by pressing a physical button on the
multifunction display.
Note: PowerSave mode is automatically cancelled
if an alarm event occurs.
D12367-1
a Series / c Series / e Series