Screen Overview - Raymarine A Series Installation And Operation Instructions Manual

3. Use the Range in or Range out controls to
switch the active application between splitscreen
and fullscreen views.
Selecting the active window — e7 / e7D
When viewing a splitscreen page you can select the
active application and view it fullscreen on an e7 /
e7D with the touch lock enabled by following the
steps below.
With a page featuring multiple applications displayed:
1. Press the Menu button.
2. Select Cycle application.
Selecting cycle application cycles through the
available applications.
3. Select Fullscreen to view the active application
in fullscreen, or
4. Select Splitscreen to return to the splitscreen
view.
Switching the active pane or display using
the keypad
The Switch Active button is used to switch the active
pane on a multi application page and / or to switch
the active display.
With multiple displays connected and / or multiple
application page(s) displayed:
Cycle sequence
1
1. Press the Switch Active button to enter switch
mode.
2. Use the Rotary control to cycle through the
available panes and / or displays.
The keypad will cycle through displays in the
order in which they were paired. On multi
application pages the Range buttons can be used
to switch the active application between full and
splitscreen.
3. Press the Back button or the Switch Active
button to exit switch mode.
Getting started

6.10 Screen overview

4
5
Screen item
1
2
3
5
4
5
6
7
D12880-1
Menus
Menus enable you configure settings and
preferences.
Menus are used in the:
• Homescreen — to configure your multifunction
display and externally-connected equipment.
• Applications — to configure the settings for that
particular application.
1 2
Description
Home
• Displays with a touchscreen — Select
the onscreen Home icon to access the
Homescreen.
• Non-touchscreen and HybridTouch
displays — Use the physical Home button
to access the Homescreen.
Databar — provides information about your
vessel and its environment. The type of
information in the databar can be customized
from the Homescreen > Customize >
Databar Set-up menu, if required.
Menu — menu options are specific to the
application that you are currently using.
Status bar — provides information specific
to each application. This information cannot
be edited or moved.
Context menu — provides information and
options specific to each application.
Menu options — menu options are displayed
when the Menu is selected.
Pop-up messages — alert you to a situation
(such as an alarm), or unavailable function.
Pop-up messages may require a response
from you — for example, select OK to silence
alarms.
3
D12196-2
97