Raymarine A Series Installation And Operation Instructions Manual page 332

Selecting radar presets
These presets require a HD or SuperHD radar
scanner. Bird mode requires a SuperHD open array
scanner with software version 3.23 or above or an
HD radome.
From the Radar application menu:
1. Select Preset Mode.
2. Select Buoy, Harbor, Costal, Offshore, or Bird
as appropriate.
Adjusting radar preset gain
Raymarine strongly recommends the use of the
preset gain modes to achieve optimum results.
However if required manual adjustments can be
made.
From the Radar application menu, with the required
Preset Mode selected:
1. Select Adjust Preset <Mode>, where <Mode>
shall be the Preset mode already selected.
2. Select Gain .
3. The Gain slider bar control is displayed.
4. Adjust the Gain slider bar control to the
appropriate setting (between 0 and 100%), or
5. Select the Auto box so that a tick is placed in the
box for automatic gain control.
Adjusting radar preset color
From the Radar application menu, with the required
Preset Mode selected:
1. Select Menu.
2. Select Adjust Preset <Mode>, where <Mode>
shall be the Preset mode already selected.
3. Select Col: .
4. The Color slider bar control is displayed.
5. Adjust the Color slider bar control to the
appropriate setting (between 0 and 100%), or
6. Select the Auto box so that a tick is placed in the
box for automatic color control.
Adjusting radar anti sea clutter
From the Radar application menu, with the required
Preset Mode selected:
1. Select Adjust Preset <Mode>, where <Mode>
shall be the Preset mode already selected.
2. Select Sea: .
3. The Sea clutter slider bar control is displayed.
4. Adjust the Sea clutter slider bar control to the
appropriate setting (between 0 and 100%), or
5. Select the Auto box so that a tick is placed in the
box for automatic sea clutter control.
Adjusting radar anti rain clutter
From the radar application:
1. Select Menu.
2. Select Rain.
The Rain clutter slider bar control is displayed.
3. Adjust the Rain clutter slider bar control to the
appropriate setting (between 0% and 100%), or
332
4. Select the Off box so that a tick is placed in the
box to turn off anti rain clutter control.
Adjusting SuperHD radar antenna boost
From the Radar application menu:
1. Select Adjust Preset <Mode>, where <Mode>
shall be the Preset mode already selected.
2. Select Antenna.
The Antenna Boost slider bar control is displayed.
3. Adjust the Antenna Boost slider bar control to the
appropriate setting (between 0 and 100%), or
4. Select the Auto box so that a tick is placed in the
box for automatic boost control.
Adjusting SuperHD radar power boost
From the Radar application menu:
1. Select Adjust Preset <Mode>, where <Mode>
shall be the Preset mode already selected.
2. Select Power.
The Power Boost slider bar control is displayed.
3. Adjust the Power Boost slider bar control to the
appropriate setting (between 0 and 100%), or
4. Select the Auto box so that a tick is placed in the
box for automatic boost control.
a Series / c Series / e Series