Operations Of The Nt31/Nt31C - Omron NT31 Setup Manual

Role and Operation of the NT31/NT31C
1-1-2

Operations of the NT31/NT31C

Displays Screens
Receives Data from a Host
Sends Data to a Host
Screen Data
The information to be displayed (screen data) can be created on a computer
using the Support Tool and stored in the NT31/NT31C. The screen data can
be displayed on the NT31/NT31C in response to instructions from the host or
touch switch operation.
The NT31/NT31C can be connected to the host by a host link or NT link and
receive necessary data from the host.
Host link, NT link
Data input using the touch panel (switch ON/OFF statuses, numeric values,
character strings) can be transmitted to the host.
Touch panel
The screen data to be displayed on the NT31/NT31C can be created on a per-
sonal computer using the Support Tool. Connect the NT31/NT31C to the per-
sonal computer with an RS-232C cable and transmit the screen data to the
NT31/NT31C.
RS-232C
Host
The screen data designated by
instructions from the host or touch
switch operation is displayed.
Host
ON/OFF information, numeric
data, etc.
Create screen data.
Personal
computer
(Support Tool)
Screen data
When the host is connected at serial port A,
the personal computer is only connected
when communicating screen data between
the NT31/NT31C and Support Tool.
Section 1-1
Host
3