System Programming with Proprietary Telephone
Description
The system can be programmed with a personal computer or a proprietary telephone (PT).
PTs available for System Programming are: KX-T7436;
KX-T7433; KX-T7431; KX-T7235; KX-T7230; KX-T7130; and KX-T7030 (Display
Proprietary Telephones).
Two extensions are allowed to perform System Programming.
The available extensions are:
a)
An extension that is connected to jack 01.
b)
An extension that is assigned as a manager.
For more information and programming instructions, refer to "System Programming" section
in the Programming Guide.
Conditions
• During System Programming the system operates normally.
• During System Programming the programming extension is considered to be busy.
• The display on the PT permits interactive programming.
• Access to System Programming is allowed only one at a time.
• To access system administration, a valid password must be entered. The password is
factory-programmed and can be changed.
• A personal computer can be used to perform System Programming.
Programming Guide References
• [006] Operator / Manager Extension Assignment
• [107] System Password
Features Guide References
• System Programming and Diagnosis with Personal Computer
User Manual References
Not applicable.
Features Guide
General Features
245