Intercept Routing - Panasonic KX-TD816 Features Manual

Intercept Routing

Description
Provides automatic redirection of incoming outside calls. There are two types of Intercept
Routing. In the first case, a call cannot be sent to the called party. This is called Rerouting. In
the second case, the call is not answered within a programmed time period. This is called
Intercept Routing — No Answer (IRNA).
Conditions
• Intercept Routing applies to ISDN, Direct In Lines (DIL) 1:1, DIL 1:N, Direct Inward
System Access (DISA)
Forwarding, and Station Hunting.
• The final destination of intercepted calls must be programmed for day and night modes.
There are five possible destinations.
a) An extension
b) An external pager
c) A DISA outgoing message
d) An extension group
e) A phantom extension
f) A voice mail extension
• If the destination is in Do Not Disturb mode, Do Not Disturb does not function and the call
is sent.
• The final destination of IRNA shows which extension the call is transferred from on the
display.
<Example>
A call from outside line 12 (outside line name: AB COMPANY) is received as follows, and
transferred by IRNA.
Display example 1: ISDN / DIL 1:1 / DID / Call Forwarding / Station Hunting
Display example 2: Floating Station
Display example 3: DIL 1:N / TAFAS
• The Caller ID is displayed, if assigned. The priority of the display is:
Caller ID name > Caller ID number > Outside line name > Blank (if none of these is
assigned).
Available for the KX-TD1232 only.
*1
Features Guide
, Trunk (Outside Line) Answer From Any Station (TAFAS), Call
*1
*1
1 0 1 → C O 1 2 : A B
2 9 1 → C O 1 2 : A B
* * * * → C O 1 2 : A B
C O M
C O M
C O M
General Features
157