One-Touch Transfer by DSS Button
Description
This feature, if programmed, allows the Direct Station Selection (DSS) Console and the
proprietary telephone user to hold an outside call and quickly transfer it to an extension. While
talking to an outside party, pressing a DSS button on the console or the proprietary telephone
provides automatic hold and transfer. There is no need to press the TRANSFER button. The
extension starts ringing immediately.
Conditions
• One-Touch Transfer cannot be performed when there is another call on Consultation Hold.
• If One-Touch Transfer mode is disabled, the user transfers an outside call by pressing the
TRANSFER button followed by the DSS button.
Programming Guide References
• [108] Automatic Hold by CO / DSS Button
Features Guide References
• Button, Direct Station Selection (DSS)
User Manual References
• 4.3.25 Call Transfer — to Extension
• 5.3.4 Call Transfer
Features Guide
General Features
189