Ringing, Discriminating - Panasonic KX-TD816 Features Manual

General Features

Ringing, Discriminating

Description
Allows the extension user to identify the incoming call by the ringing pattern. (See "Tone /
Ring Tone" section.)
Conditions
• When there are multiple incoming calls and the extension goes from off-hook to on-hook,
the calls are rung according to the following priority:
a) Consultation Hold Recall
b) An incoming call from a line in which the Prime Line Preference — Incoming function
has been set (with a proprietary telephone only)
c)
Call Waiting
d)
Incoming calls; Hold Recall; Transfer Recall; Unattended Conference Recall
• If multiple incoming calls arrive at an on-hook extension simultaneously, priority as to
which calls should be rung is generally on a "first-come, first-served" basis. In the case of
proprietary telephones (PT), however, when the Prime Line Preference — Incoming
function has been set, this line takes precedence.
• Incoming TAFAS (Trunk (Outside Line) Answer From Any Station) calls can be identified
by ringing signals sent out from the external pager. The ringing pattern is the same as the
outside calls.
• The digital PT user can select a desired tone frequency for each CO and the INTERCOM
button.
Programming Guide References
No programming required.
Features Guide References
• Ringing Tone Selection for CO Buttons
• Ringing Tone Selection for Intercom Calls
User Manual References
Not applicable.
222 Features Guide