Alternate Calling — Ring / Voice
Description
This system offers two methods of Intercom Calling — Ring-Calling and Voice-Calling. Ring-
Calling informs the called party of an incoming call with a ring tone, while the Voice-Calling
uses the calling party's voice. The proprietary telephone user can select ring tone or voice
calling by Station Programming. If the user selects Voice-Calling, the calling party can talk to
the user immediately after the confirmation tone. The calling extension user can change the
called extension user's pre-set method (ring tone or voice) by pressing " " after dialing the
extension number. By doing so, Ring-Calling is switched to Voice-Calling, or vice versa, at the
called extension.
Conditions
• Single line telephone users receive calls with Ring-Calling only.
Programming Guide References
No programming required.
Features Guide References
• Handsfree Answerback
User Manual References
• 2.1.1 Station Programming Instructions
• 4.3.3 Alternate Calling — Ring / Voice
Features Guide
General Features
13