Power Failure Transfer - Panasonic KX-TD816 Features Manual

General Features

Power Failure Transfer

Description
If a power failure should happen, or a system is in an off-line condition, specific extension
telephone instruments are automatically connected to specific outside lines. This provides
outside line conversations between the following extensions and analog outside lines:
KX-TD816:
Outside line 1 is connected to extension jack number 1
Outside line 2 is connected to extension jack number 2
Outside line 5 is connected to extension jack number 9
Outside line 6 is connected to extension jack number 10
KX-TD1232:
Outside line 1 is connected to extension jack number 1
Outside line 2 is connected to extension jack number 2
Outside line 3 is connected to extension jack number 9
Outside line 4 is connected to extension jack number 10
Outside line 9 is connected to extension jack number 17
Outside line 10 is connected to extension jack number 18
Single line telephones can work in case of a power failure. Connect these telephone
instruments to the above extension jacks.
Conditions
• All other conversations except for the above combinations are disconnected during a power
failure.
• Only the outside line conversations can operate. All other features do not work.
Connection References
• 2.3.1 Outside Line Connection
• 2.3.2 Extension Connection
• 2.4.2 4-CO Line Unit Connection
• 2.4.3 8-Station Line Unit Connection
• 2.5.1 Auxiliary Connection for Power Failure Transfer
Programming Guide References
No programming required.
Features Guide References
• Power Failure Restart
208 Features Guide