Vehicles - Mercedes-Benz 2013 SL Operator's Manual

Vehicle functions
312
Select the seat (
X
Select Backr. Sides
X
COMAND controller and press W to
confirm.
A scale appears.
Turn cVd or slide ZVÆ the COMAND
X
controller and press W to confirm.
To exit the menu: press the % back
X
button.
i
For SL-Class vehicles with dynamic
multicontour seats: when driving dynamics
are activated due to a change of direction
(e.g. cornering), the backrest side cushion
settings can temporarily not be used.
Adjusting the seat side bolsters
This function is only available on SL-Class
vehicles with multicontour seats or dynamic
multicontour seats.
This function allows you to adjust the air
cushions in the seat side bolsters.
page 311).
Y
by turning cVd the
Select the seat ( page 311).
X
Y
Select Seat Sides
X
COMAND controller and press W to
confirm.
A scale appears.
Turn cVd or slide ZVÆ the COMAND
X
controller and press W to confirm.
To exit the menu: press the % back
X
button.
Balance
This function is available on SL-Class

vehicles.

The Balance function controls the distribution
of heat on the seat backrest and cushion.
The Balance function influences the currently
set heating level of the seat heating; see the
separate vehicle Operator's Manual.
Select the seat ( page 311).
X
Y
Select Balance by turning cVd the
X
COMAND controller and press W to
confirm.
A scale appears and shows the current
setting. Positive values indicate the heat
output for the seat backrest, negative
values indicate the heat output for the seat
cushion. The intensity is indicated by an
orange bar in the stylized seat above the
scale.
by turning cVd the