Entering A Point Of Interest - Mercedes-Benz 2013 SL Operator's Manual

Navigation
330
Waypoint menu with two waypoints
Editing waypoints
You can:
change waypoints
R
change the sequence in the waypoint menu
R
delete waypoints
R
To change the sequence, both waypoints
must be entered.
To change waypoints: select the symbol
X
for waypoint 1 or 2 in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
Select Edit and press W to confirm.
X
Use one of the destination entry options
X
offered.
To change the sequence of the
X
waypoints: select
menu by turning cVd the COMAND
controller and press W to confirm.
The entries are swapped.
To delete waypoints: select the symbol
X
for waypoint 1 or 2 in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
Select Delete
X
i
You can use this menu item to delete a
waypoint directly after entry.
Swap in the waypoint
and press W to confirm.
Accepting waypoints for the route
Select Start in the waypoint menu by
X
turning cVd the COMAND controller and
press W to confirm.
The route is calculated with the entered
waypoints.
i
The Continue menu item is displayed
instead of Start if Calculate
Alternative Routes
navigation menu (option 2) (
In the example, there are both waypoints 1
and 2.

Entering a point of interest

Calling up the points of interest menu
Example: POI menu
POIs are predefined destinations within
categories, e.g. a gas station in the
AUTOMOTIVE category.
To switch on navigation mode: press the
X
Ø function button.
is activated in the
page 347).
Y