Change Of Direction Phase - Mercedes-Benz 2013 SL Operator's Manual

Navigation
342
Route guidance begins once a route has been
calculated ( page 323).
Y
COMAND guides you to your destination by
means of navigation announcements in the
form of audible navigation announcements
and route guidance displays.
The route guidance displays can only be seen
if the display is switched to navigation mode.
If you do not follow the navigation
announcements or if you leave the calculated
route, COMAND automatically calculates a
new route to the destination.
If the digital map contains the corresponding
information, the following applies:
when selecting a route, COMAND tries to
R
avoid roads that only have limited access,
e.g. roads closed to through traffic.
roads that have time restrictions (e.g.
R
closed on Sundays and public holidays) are
considered for route guidance on days
when they are open. For this purpose, the
relevant times must be correctly stored in
the database.
Displays during route guidance
Change of direction
Changes of direction have three phases:
Preparation phase
R
Announcement phase
R
Change-of-direction phase
R
Example: preparation phase
Next road
:
Point at which the change of direction
;
takes place (light blue dot)
Current vehicle position (the tip of the
=
triangle indicates the vehicle's direction
of travel)
Current road
?
Display ? depends on the setting selected
for "Map information in the display"
( page 365).
Y
COMAND prepares you for the upcoming
change of direction. Based on the example
display below, the change of direction is
announced by the Prepare to turn
right message. You see the full-screen map.
Example: announcement phase
Next road
:
Change of direction (turn right here)
;
Graphic representation of the distance to
=
the next change of direction
Distance to the next change of direction
?