Importing Contacts - Mercedes-Benz 2013 SL Operator's Manual

Importing phone book entries
This function allows you to store phone book
entries from the mobile phone in the address
book.
The following can be used as a source:
the mobile phone
R
the memory card
R
the USB device
R
®
the Bluetooth Interface
R
Imported phone book entries are indicated in
the phone book by different symbols
( page 389).
Y
Search for an entry in the phone book on
X
the mobile phone d(
Select the list symbol to the right of the
X
entry by sliding VY the COMAND
controller and press W to confirm.
Select Save Entry
X
confirm.
The Data saved. message appears. The
phone book entry is now saved as an
address book entry.
The d symbol is replaced by the ¥
symbol.

Importing contacts

Information and requirements
You can import contacts (vCards) from the
memory card and a USB device into the
address book, or receive vCards via
®
Bluetooth .
i
Up to 2500 entries can be imported into
the address book. A message notifies you
when the maximum number is reached.
You then have to delete existing entries in
order to import new entries (
Depending on the source of the contact data,
different requirements apply:
page 389).
Y
and press W to
page 399).
Y
Source Conditions
memory card The SD memory card is
inserted (
contains importable
contact details.
USB device The USB device is inserted
into the USB port
( page 439). It contains
Y
importable contact details.
Requirements for receiving vCards via
®
Bluetooth
You can receive vCards from devices (e.g.
from a PC) that support the sending of vCards
®
via Bluetooth .
It is not necessary to authorize the device in
COMAND to do so.
Please bear the following in mind:
®
R Bluetooth must be activated in COMAND
and on the Bluetooth
operating instructions for the device.
®
R the Bluetooth device must be able to send
vCards via Bluetooth
instructions for the device).
®
R the Bluetooth device in the vehicle must
be switched on.
Importing from the memory card or USB
device
Entries imported from the memory card or
from a USB device have the ¯ symbol.
The following conditions must be fulfilled in
order to import vCards:
vCards (vcf files) may be located in the main
R
directory or in folders. COMAND allows you
to select the relevant folders directly.
vCards must have the file extension ".vcf".
R
i
One vcf file may contain several vCards.
COMAND supports vCards in versions 2.1
and 3.0.
Select Address Book
X
or, if the telephone basic menu is shown,
Telephone
page 439). It
Y
®
device, see the
®
(see operating
in the address book
Z
403