Date - Mercedes-Benz 2013 SL Operator's Manual

System settings
304
Select Display
X
Select Day Mode,
X
Automatic by turning cVd the COMAND
controller and press W to confirm.
A dot indicates the current setting.
Design
Day Mode
Night Mode
Automatic
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
i
If you set the time in 30-minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost. Switching between
summer and standard time (
i
The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order
to work properly:
route guidance on routes with time-
R
dependent traffic guidance
calculation of expected time of arrival
R
and press W to confirm.
Night Mode or
Explanation
The display is set
permanently to day
design.
The display is set
permanently to night
design.
If the Automatic setting
is selected, COMAND
evaluates the readings
from the automatic
vehicle light sensor and
automatically switches
between the display
designs.
page 305).
Y
i
With this function, you can set the time
for every display in the vehicle.
Setting the time
Press W.
X
Select Time by turning cVd the COMAND
X
controller and press W to confirm.
Select Set Time and press W to confirm.
X
Set the time by turning cVd the COMAND
X
controller and press W to confirm.
The time is accepted.
Setting the time/date format
Press W.
X
Select Time by turning cVd the COMAND
X
controller and press W to confirm.
Select Format and press W to confirm.
X
The # symbols show the current settings.
Set the format by turning cVd the
X
COMAND controller and press W to
confirm.
Abbreviation
DD / MM / YY
HH/MM
You can set the 24-hour or the AM/PM
format.
Meaning
Day/Month/Year
(date format)
Hours/Minutes
(time format)