System Settings; Setting - Mercedes-Benz 2013 SL Operator's Manual

Option 2: city list as selection list
COMAND either shows the selection list
automatically or you can call up the selection
list from the list with the character bar.
The example shows the selection list after the
city NEW YORK has been entered. The entry is
highlighted automatically.
Confirm NEW YORK by pressing W the
X
COMAND controller.
The address entry menu appears. You can
now enter a street, for example.
Observe the information on destination entry
( page 318).
Y

System settings

Your COMAND equipment
These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your COMAND
System settings
system may not be equipped with all the
features described.
Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
Press W.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
Select Display and press W to confirm.
X
Select Brightness
X
confirm.
Adjust the brightness by turning cVd the
X
COMAND controller and press W to
confirm.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can set the design by
manually selecting day or night design or opt
for an automatic setting.
Press W.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
and press W to
Z
303