Information And Requirements - Mercedes-Benz 2013 SL Operator's Manual

Select the list symbol to the right of the
X
entry by sliding VY the COMAND
controller and press W to confirm.
Select Assign Speed Dial Preset
X
press W to confirm.
The speed dial list appears. The selected
phone book entry is listed as the first entry.
The next available speed dial preset is
highlighted.
Select the speed dial preset by turning
X
cVd the COMAND controller and press
W to confirm.
The phone book entry is saved in the speed
dial preset.
Making a call via speed dial
The speed dial list contains stored phone
book entries ( page 394).
Y
Option 1:
Hold down one of the number keys for
X
longer than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialing.
Option 2:
Call up the telephone basic menu
X
( page 383).
Y
Select Call Lists
X
turning cVd the COMAND controller and
press W to confirm.
The speed dial list appears.
and
by sliding VÆ and
Select Speed Dial Preset List
X
turning cVd the COMAND controller and
press W to confirm.
The speed dial list appears.
Select preset and press W to confirm.
X
The telephone basic menu displays the
selected entry. This initiates dialing.
Deleting a speed dial number
To delete a speed dial number: select
X
Delete Speed Dial Preset
dial menu by turning cVd the COMAND
controller and press W to confirm.
The speed dial number is deleted.
To delete all speed dial numbers: select
X
Delete All Speed Dial Presets
Speed dial menu by turning cVd the
COMAND controller and press W to
confirm.
You will be asked whether you want to
continue.
Select Yes or No and press W to confirm.
X
If you select Yes, all speed dial presets will
be deleted from the speed dial list.
If you select No, the process will be
canceled.
Text messages

Information and requirements

If the above conditions are met, new incoming
text messages appear in the COMAND text
message inbox. In addition, a tone sounds
and the / symbol appears. The symbol is
no longer displayed once you have read the
text message. The ú mail symbol is
displayed if the text message memory is full.
The symbol is no longer displayed once you
delete at least one text message.
i
COMAND may not load all of the most
recent text messages:
This may occur in exceptional cases, for
example when using certain mobile
Telephone
395
by
in the Speed
in the
Z