Options; Optional Paper Tray (Lt-5300); Memory Board; Dimm Types - Brother MFC-8860DN User Manual

B

Options

Optional Paper Tray
(LT-5300)
An optional lower tray can be installed, and it
can hold up to 250 sheets of 80 gsm (20 lb)
paper.
When an optional tray is installed, the
machine can hold up to 550 sheets of plain
paper. If you want to buy an optional lower
tray unit, contact your Brother dealer.
For setup, see the User's Guide that we have
supplied with the lower tray unit.
90

Memory Board

This machine has 32 MB of standard memory
B
and one slot for optional memory expansion.
You can expand the memory up to 544 MB by
installing dual in-line memory modules
(DIMMs). When you add the optional
memory, it increases the performance for
both copier and printer operations.

DIMM types

You can install the following DIMM:
128 MB Buffalo Technology
VN133-D128 / VN133-X128
256 MB Buffalo Technology
VN133-D256
512 MB Buffalo Technology
VN133-D512
64 MB TechWorks 12165-0004
128 MB TechWorks 12462-0001
256 MB TechWorks 12485-0001
512 MB TechWorks 12475-0001
Note
• For more information, visit the Buffalo
Technology site at
http://www.buffalotech.com.
• For more information, visit the Techworks
web site at http://www.techworks.com.
In general, the DIMM must have the following
specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
Dram Type: SDRAM 2 Bank
B
B
B