Brother MFC-8860DN User Manual page 117

Error Message Cause
The toner cartridge and drum unit
Toner Life
assembly is not installed properly,
End
or the toner cartridge is used up
and printing is not possible.
If the LCD shows Toner Low, you
Toner Low
can still print; however, the
machine is telling you that the toner
cartridge is near the end of its life
and the toner will soon run out.
More than one optional tray is
Too Many
installed.
Trays
The machine has a mechanical
Unable to
problem.
Init.
(Initialize)
Unable to
Print
The machine has a mechanical
Unable to
problem.
Scan
Document is too long for duplex
scanning.
Paper is not the correct size.
Wrong Paper
Size
Troubleshooting and routine maintenance
Action
Do one of the following:
Re-install the toner cartridge and drum unit
assembly.
Replace the toner cartridge with a new one.
(See Replacing the toner cartridge (TN-
3145/TN-3185) on page 119.)
Order a new toner cartridge now.
The maximum number of optional trays is one.
Remove any additional trays.
'
Turn off the machine s power switch and then on
again. If the error message continues leave the
machine for several minutes and then try to print,
copy or scan again. (The machine can be turned
off for up to 4 days without losing faxes stored in
the memory. See Checking if the machine has
faxes in its memory on page 108.)
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes before
you try it again. (The machine can be turned off
for up to 4 days without losing faxes stored in the
memory. See Checking if the machine has faxes
in its memory on page 108.)
Press Stop/Exit. Use a suitable size of paper for
duplex scanning. See Scan on page 146.
Load the correct size of paper (A4, Letter, Legal
or Folio) and then set the Paper Size (Menu, 1,
3) and Tray Use in Fax Mode (Menu, 1, 7, 2).
See Paper Size on page 18 and Tray use in Fax
mode on page 19.
107