Brother MFC-8860DN User Manual page 116

Error Message Cause
The machine's memory is full.
Out of Memory
The paper is jammed in the back of
Paper Jam
the machine.
Back
The paper is jammed in the duplex
Paper Jam
tray.
Duplex
The paper is jammed inside the
Paper Jam
machine.
Inside
The paper is jammed in the MP tray
Paper Jam
of the machine.
MPTray
The paper is jammed in the paper
Paper Jam
tray of the machine.
Tray1
Paper Jam
Tray2
It is time to replace the fuser unit.
Replace Fuser
It is time to replace the laser unit.
Replace Laser
It is time to replace the paper
Replace PF
feeding kit for Tray 1.
Kit1
It is time to replace the paper
Replace PF
feeding kit for Tray 2.
Kit2
It is time to replace the paper
Replace PF
feeding kit for the MP tray.
KitMP
The scanner lock is locked.
Scanner
Locked
The toner cartridge and drum unit
Toner Error
assembly is not installed properly.
106
Action
Fax sending or copy operation in progress
Do one of the following:
Press Start to send or copy the scanned
pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See Out of
Memory message on page 38 or page 78.)
Printing operation in process
Do one of the following:
Reduce print resolution. (See Advanced tab
in the Software User's Guide on the
CD-ROM.)
Clear the faxes from the memory. (See Out
of Memory message on page 38 or page 78.)
See Paper jams on page 110.
See Paper jams on page 110.
See Paper jams on page 110.
See Paper jams on page 110.
See Paper jams on page 110.
Call Brother Customer Service to replace the
fuser unit.
Call Brother Customer Service to replace the
laser unit.
Call Brother Customer Service to replace the
PF Kit 1.
Call Brother Customer Service to replace the
PF Kit 2.
Call Brother Customer Service to replace the
PF Kit MP.
Open the document cover, and then release the
scanner lock lever.
Press Stop/Exit.
Reinstall the toner cartridge.