12. Using the Wi-Fi function
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu.
(P37)
[MENU] >
[Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set
[LUMIX CLUB]
•
P267
Refer to
for details.
[PC Connection]
•
For details on how to enter characters, refer to
•
If you are using the PC with standard settings, you do not need to change the workgroup.
[Device Name]
[External AV device]
•
Refer to
P272
for details.
Acquires or changes the "LUMIX CLUB" login ID.
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is "WORKGROUP".)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
[Restore to Default]:
Restores the default state.
You can change the name of this unit.
1
Press [DISP.].
2
Enter the desired device name.
•
For details on how to enter characters, refer to
section on P54.
•
A maximum of 32 characters can be entered.
Images can be sent to the AV device of relatives and
acquaintances via "LUMIX CLUB".
283
"
"
Entering Text
section on P54.
"
"
Entering Text