Panasonic LUMIX DMC-GM1 Operating Instructions For Advanced Features page 326

14. Others
Recording
This unit suddenly turns off during recording.
•
When a high ambient temperature, continuous recording in Burst Mode or of a motion picture,
continuous use of a Wi-Fi connection or other conditions are causing the camera to overheat,
[ ] flashes. If a message is displayed after [
automatically to protect itself. When this happens, some functions will be disabled until the
camera cools down.
Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
•
Is the subject focused?
> [Focus/Release Priority] is set to [FOCUS] at the time of purchase, and so you cannot take
pictures until the subject is in focus.
The recorded picture is whitish.
•
Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to
P342 when the image sensor gets dirty.
The recorded picture is too bright or dark.
•
Check that the exposure is correctly compensated.
•
Is the AE Lock (P155)
Multiple pictures are taken at one time.
•
Cancel the following settings:
–
Burst/Auto Bracket/[
–
White Balance Bracket
(P146)
applied incorrectly?
] of the self-timer
(P127)
] flashes, the camera will turn off
(P157)
(P167)
326