12. Using the Wi-Fi function
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•
Registration to "LUMIX CLUB"
•
Address number and access number acquired by the destination External AV device.
Click the followings to jump to the beginning of each menu.
Sending an image each time a recording is made ([Send Images While
Select and send the images ([Send Images Stored in the Camera])
•
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
Sending an image each time a recording is made ([Send Images While
Recording])
1
Select the menu.
[Wi-Fi] >
[New Connection] > [Send Images While Recording] > [AV
device]
2
Select [Home] or [External].
3
Select [Via Network] or [Direct], and connect.
•
When [External] is selected, [Direct] cannot be selected.
4
Select a device you want to connect.
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
5
Take pictures.
•
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
(P267)
Recording])
(P282)
P255
(P273)
(P242)
255
(P272)
P256