Table of Contents
Advertisement
[Wi-Fi Setup] Menu
This configures the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Displaying the [Wi-Fi Setup] menu.
●
[
]
[Wi-Fi]
[Priority of Remote
Device]
[Wi-Fi Password]
[PC Connection]
[Device Name]
[Wi-Fi Function Lock]
[Network Address]
[Wi-Fi Setup]
This sets either the camera or the smartphone as
the priority control device to be used during remote
recording. (392)
You can enhance security by connecting using a
password. (384)
You can set the workgroup.
To send images to a PC, you need to connect to the
same workgroup as the destination PC.
(The default setting is "WORKGROUP".)
• To change the workgroup name, press
the new workgroup name.
• To return to the default settings, press [DISP.].
You can change the name (SSID) of the camera.
• To change the SSID name, press [DISP.] and enter the
new SSID name.
• A maximum of 32 characters can be entered.
To prevent incorrect operation and use of the Wi-
Fi function by a third party and to protect personal
information in the camera and included with images,
protect the Wi-Fi function with a password.
[Setup]: Enter any 4-digit numbers as the password.
[Cancel]: Cancel the password.
• Once a password is set, you are required to enter it
each time you use the Wi-Fi function.
• If you forget your password, you can use [Reset
Network Settings] in the [Setup] menu to reset the
network settings and thereby reset the password.
Displays the MAC address and IP address of the
camera.
14. Wi-Fi/Bluetooth
and enter
425
Advertisement
Table of Contents
