Panasonic LUMIX DMC-GM1 Operating Instructions For Advanced Features page 210

10. Recording Motion Pictures
•
When a high ambient temperature, continuous motion picture recording or other conditions are
causing the camera to overheat, [
camera will turn off automatically to protect itself. When this happens, some functions will be
disabled until the camera cools down.
•
The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
•
The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
•
The [Sensitivity] will be set to [AUTO] (for motion pictures) when recording motion pictures.
Also, the [ISO Limit Set] will not operate.
•
When recording a motion picture, [Stabilizer] will be fixed to [
•
It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures. (P305)
•
If while recording motion pictures using the AC adaptor (optional) the power supply is cut off
due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture will
not be recorded.
•
It will be recorded in the following categories for certain Recording Modes. A motion picture
recording matching each Recording Mode will be performed for the ones not listed below.
Selected Recording Mode
–
Programme AE Mode
–
Aperture-Priority AE Mode
–
Shutter-Priority AE Mode
–
Manual Exposure Mode
–
[Clear Nightscape]/[Artistic Nightscape]/[Handheld Night
Shot]/[Clear Night Portrait] (Scene Guide Mode)
Not available in these cases:
•
Motion pictures cannot be recorded in the following cases.
–
[Glistening Water]/[Glittering Illuminations]/[Soft Image of a Flower] (Scene Guide Mode)
–
[Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine] (Creative
Control Mode)
–
When using [Time Lapse Shot]
–
When using [Stop Motion Animation]
] flashes. If a message is displayed after [
210
] flashes, the
] even if it is set to [
Recording Mode while
recording motion picture
Normal motion picture
Low Light Mode
].