Panasonic LUMIX DMC-GM1 Operating Instructions For Advanced Features page 300

13. Connecting to other equipment
•
Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the printer are connected, the status indicator blinks
and the alarm beeps. If this happens during printing, stop printing at once. If not printing,
disconnect the USB connection cable.
•
Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is
displayed.
(May not be displayed depending on the type of printer used.)
•
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
•
Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
Not available in these cases:
•
Motion pictures recorded cannot be printed out.
300