Setting The Picture Quality And Size; Setting The Aspect Ratio Of Pictures; Setting The Number Of Pixels - Panasonic LUMIX DMC-GM1 Operating Instructions For Advanced Features

5. Picture Quality and Colour Tone Settings

Setting the Picture Quality and Size

Setting the aspect ratio of pictures

Applicable modes:
This allows you to select the aspect ratio of the pictures to suit printing or the playback method.
[MENU] > [Rec] > [Aspect Ratio]
[4:3] [Aspect Ratio] of a 4:3 TV
[3:2] [Aspect Ratio] of a 35 mm film camera
[16:9] [Aspect Ratio] of a high-definition TV, etc.
[1:1] Square aspect ratio
•
The ends of the recorded pictures may be cut at printing so check before printing.

Setting the number of pixels

Applicable modes:
Set the number of pixels.
The higher the numbers of pixels, the finer the detail of the pictures will appear even when
they are printed onto large sheets.
[MENU] > [Rec] > [Picture Size]
When the aspect ratio is [4:3].
Settings
[L] (16M)
[ M] (8M)
[ S] (4M)
When the aspect ratio is [16:9].
Settings
[L] (12M)
[ M] (6M)
[ S] (2M)
• When [Ex. Tele Conv.]
except for [L].
•
The picture size will be fixed to [S] when [Burst Rate] is set to [SH].
Image size
4592k3448
3232k2424
2272k1704
Image size
4592k2584
3232k1824
1920k1080
(P194) is set, [ ] is displayed on the picture sizes of each aspect ratio
When the aspect ratio is [3:2].
Settings
[L] (14M)
[ M] (7M)
[ S] (3.5M)
When the aspect ratio is [1:1].
Settings
[L] (11.5M)
[ M] (6M)
[ S] (3M)
128
(P338)
Image size
4592k3064
3232k2160
2272k1520
Image size
3424k3424
2416k2416
1712k1712