Paper Feed Jam - Olivetti PG L22 Special Service Manual

[JAM error]
2 - 2

Paper feed jam

• Does the paper feed jam occur when the power is turned on?
• Yes
• Yes Remove the paper.
• No
• No Replace the paper sensor plate.
• Yes
• No Has the paper reached the paper sensor plate?
• No
• No Check the hopping roller assembly or tray or hopping motor.
• Yes
• No Set the image drum cartridge properly.
• Yes Has the paper reached the outlet sensor plate?
• Yes
• No Replace the outlet sensor plate.
• Yes
• No Is the main/drum motor rotating?
• No
• No Connect DM connector properly.
• Yes
• No Replace the main/drum motor.
• Yes
• Yes Is the transfer roller rotating?
2 - 2 - a
Y103920-3
Is the paper on the paper sensor plate?
Is the operation of the paper sensor plate normal (moves freely when it is
touched)?
Replace the high voltage/sensor board.
Is the hopping roller rotating?
Is the image drum cartridge being set properly?
Is the operation of the outlet sensor plate normal (moves freely when it is
touched)?
Clean the outlet sensor on the high voltage/sensor board or replace the high
voltage/sensor board.
Is DM connector on the main control board being connected properly?
Is the coil resistance (normal resistance: both between Pins l and 2, as well as
Pins 3 and 4 are about 8.6ý) of the main/drum motor correct ?
Replace the main control board.
Service Manual
62