Olivetti PG L22 Special Service Manual page 55

LCD
Status level
■
Warn-
ing TONEREMP
■
Warn-
ing TONERSNS
■
Warn-
ing CHG DRUM
Normal PRINT
DEMO
Normal PRINT
FONTS
Normal PRINT
MENU MAP
Normal PRINT
FILELIST
Normal PRINT
CLEANING
Warn- INVALID
ing DATA
■
Warn-
ing ERR PSE
■
Warn-
ing tttt EMPTY
■
Warn-
ing TRAY2 COVER OPEN
■
Warn-
ing FILE SYSTEM IS FULL
■
Warn-
ing FILE IS WRITE
PROTECTED
■
Warn-
ing INVALD ID.JOB
REJECTED
■
Warn-
ing LOG BUFFER FULL.
JOB REJECTED
■
Warn-
ing FILE OPERATION
FAILED nnn
Error MANUAL
mmmm REQUEST
Y103920-3
Table 5-1 (2/5)
LED
Varies
Toner near empty. (This state occurs after printing 100 sheets from
TONERLOW.)
Displayed combined with other messages in the first line.
Not displayed when "CHG DRUM" for drum life is displayed,
however. Possible to cancel print job or continue normal operation.
Varies Something is wrong with the toner sensor. Displayed combined
with other messages in the first line when the engine is set to
Shipping mode. Normal operation is possible.
Error, explained later, is displayed when the engine is set to
Factory mode.(ERR 163)
Varies Drum cartridge life (Warning). Displayed combined with other
messages of the first line.
TONER EMP ERROR status code is set to 10969 in the state of
warning which has restored temporarily CHG DRUM ERROR
(40996) when the drum life has occurred at the same time by
cover open/close presses "ON-LINE" switch.
A status code is set to 10060 in the state of CHG DRUM inde-
pendent warning.
Varies Demo page printing.
or Blink
Varies Fonts sample printing.
or Blink
Varies Menu map printing.
or Blink
Varies
File list printing.
or Blink
Varies Cleaning page printing.
or Blink
Varies Received invalid data. Prompts the user to press ON-LINE switch
to clear Warning display. Displayed when the printer receives an
unsupported PDL command.
Blink Interpreter detects an error due to following reasons.
Data received after this is ignored till the end of the job.
When the job is received completely, this is automatically cleared.
- The job has a grammatical error.
- The page is complicated, and VM was used up.
Varies Tray tttt has run out of paper. Handled as Warning until the user
designates the tray that has run out of paper. * Scroll display
Varies Second Tray Cover Open
* Scroll display
Varies Flash Full has occurred. This is a transient warning.
Displayed until the job is completed, then, cleared. * Scroll display
Varies
An attempt to write in a write-protected file was made.
Because this is a transient warning, it is displayed until the job is
completed. then, cleared. * Scroll display
Varies Notifies a user that the job has been cancelled as permission for
printing has not been received. (Job Account-related) This is
displayed until the ON LINE key is pressed. * Scroll display.
Varies Notifies a user that the job has been cancelled as the log buffer is
full. (Job Account-related) This is displayed until the ON LINE key
is pressed. * Scroll display.
Varies A FLASH error other than No.26 and No.27 has occurred.
Operation that does not use FLASH is possible. * Scroll display
Light Manual print request. Prompts the user to set paper indicated by
mmmm manually. * Scroll display
Service Manual
Descroption
55