Olivetti PG L22 Special Service Manual page 93

8) Interface Parameter Setting
Press MENU key several times.
Press ITEM key to display the item on the LCD to set up.
Press VALUE key to display the value on the LCD to set up.
Press SELECT key, and display "*" mark on the right side of the value:
By pressing the ON LINE key, menu setting mode is completed and the printer returns to on-
line state.
Ready
Press the MENU key 9 times.
Ready
Ready
Press the ITEM + key.
Ready
Press the ITEM + key.
Y103920-3
ON-LINE
XXX
XXX : PCL, AUTO, PSE*, HEX DUMP, PRR or FX
"RS232C MENU" is displayed on the LCD.
RS232C
MENU
Item
Contents of Display
RS232C
Factory Setting: ENABLE
Item
Contents of Display
FLOW CTL
DTR HI
DTR LO
XONXOFF
RbstXON
Factory Setting: DTR HI
Service Manual
* PSE means POSTSCRIPT 3 EMULATION.
Press the SELECT key.
RS232C I/F
Function
ENABLE ENABLE
DISABLE DISABLE
Flow CTL
Function
SPACE-READY
MARK-READY
Sending at intervals of 1 sec.
93