Olivetti PG L22 Special Service Manual page 109

10) Interface Parameter Setting
Press MENU key several times.
Press ITEM key to display the item on the LCD to set up.
Press VALUE key to display the value on the LCD to set up.
Press SELECT key, and display "*" mark on the right side of the value:
By pressing the ON LINE key, menu setting mode is completed and the printer returns to on-
line state.
Ready
Press the MENU key 9 times.
(If RS232C is installed, press the MENU key 10 times.)
Ready
Press the ITEM + key.
Ready
Press the ITEM + key.
Y103920-3
ON-LINE
XXX
XXX : PCL, AUTO, PSE*, HEX DUMP, PRR or FX
USB
MENU
Item
USB Contents of Display
Factory Setting: ENABLE
Service Manual
* PSE means POSTSCRIPT3 EMULATION.
USB I/F
Function
ENABLE ENABLE
DISABLE DISABLE
109