Installation Of Software - Singer Futura CE-150 Instruction Manual

INSTALLATION OF SOFTWARE

In order to start using the software on your PC you would have
to first install the contents of the CD to your PC. This procedure
is refered to as "installation procedure". Please follow the
instructions below in order to successfully install the
software for your FUTURA sewing & embroidery machine
on your personal computer.
The software for your FUTURA sewing & embroidery machine
comes on a CD-ROM disc.
In most personal computers the default drive setting for a
CD-ROM
CD-ROM drive is "D:"
Please insert the installation software for your FUTURA
sewing & embroidery machine into the CD-ROM disc receiver
in your PC.
After some seconds, the Installation procedure of the software
will start automatically.
In case this will not occur after a short while, you can run the
installation procedure manually by going to the "Start" option
of Windows, select "Run", type "D:\FuturaStart..exe" and click
on OK.
After some seconds the step by step installation of the
software begins with the Welcome window. You can always
abort the installation procedure by clicking on the "Cancel"
button.
Click on "Next" to move on the next screen.
After reading and agreeing with terms given in the License
Agreement, please click on "Yes", and again click on Next,
and then select the directory where the software should be
installed. It would be recommended to use the default
selected directory.
Simply click on "Next" to continue.
72