Install Optical Drive; Install Intel® I/O Expansion Module (Optional); Install Intel® Raid C600 Upgrade Key (Optional) - Intel R2000LH2 Quick Installation User's Manual

General Installation Process
11

Install Optical Drive

A
Install the plastic guide onto the back
of the drive and attach with two screws
as shown.
12
Install Intel® I/O Expansion Module (optional)
D
C
B
I/O
Connector
13
Install Intel® RAID C600
Upgrade Key (optional)
Locate the white 4-pin key header next to Riser Slot 1. Carefully
pickup the Intel ® RAID C600 Upgrade Key. Match the key and
connector orientation and press down to install.
B
Insert the optical drive into chassis opening
and push all the way until it stops.
C
Connect the cables
as shown.
A
A
Remove the screw securing the filler panel from
chassis and remove it.
B
Position the module over the server board, fit the
A back of the module into the back panel slot.
C
Attach the module to the server board connector.
D
Secure the module with the screws as shown.
NOTE: If included, remember to install the EMI shield.
Fix the I/O Module to the
Bracket before installing it
at the left edge of
the Board:
A
Install the module to the
provided bracket.
B
Secure the module to the
bracket with the three screws.
C
Install the provided
connector converter.
C
B
C
A
C
B
8
IMPORTANT NOTE: If you do
not install a device at this
location, install the optical device
bay filler panel shown below. This
is required to maintain proper
system cooling.
A
D
B
I/O
Connector