System Maintenance/Adjustments
User's Maintenance Menu
This is a maintenance menu category among the normal menu categories.
(Different from the system maintenance menus) The items that can be set under this menu are indicated below.
Shaded areas are default setting.
Category
Item (Upper Display)
Maintenance
MENU RESET
Menu
SAVE MENU
RESTORE
MENU
POWER SAVE
PAPER BLACK
PAPER COLOR
OHP BLACK
OHP COLOR
Operator Panel Display
Value (Lower Display)
EXECUTE
EXECUTE
EXECUTE
ENABLE
DISABLE
SET
+1
+2
-1
SET
+1
+2
-1
SET
+1
+2
-1
SET
+1
+2
Initializes menu settings.
Stores current menu settings.
Changes menu settings to stored ones. Displayed only when
menu settings have been stored.
Sets Power Save mode enabled/disabled. Shift time
to enable Power Save mode can be changed using
"POWER SAVE SHIFT TIME" on "SYSTEM CONFIG.MENU"
0
Corrects print non-uniformity due to temperature variation.
With faded images, change the value. With scattering or
snowing images in print output of high print density, decrement
-2
the value. With faded images in print output of high print
density, increment the value.
0
Corrects print non-uniformity due to temperature variation.
With faded images, change the value. With scattering or
snowing images in print output of high print density, decrement
-2
the value. With faded images in print output of high print
density, increment the value.
0
Used to correct dispersion of printing due to temperature
difference. Change the value if a printed OHP sheet is blurred.
If an output shows a scattered- or snowing-like phenomenon in
-2
a high-density print part, decrement the value. If an output is
blurred, increment the value.
0
Used to correct dispersion of printing due to temperature
difference. Change the value if a printed OHP sheet is blurred.
If an output shows a scattered or snowing-like phenomenon in
-2
a high-density print part, decrement the value. If an output is
-1
blurred, increment the value.
Function
31