Table of Contents
Advertisement
M
AINTENANCE
NOTE
When the on-screen display indicates that the toner is low, or if print appears
faded, first open the top cover and try tapping the cartridge a few times to
evenly distribute the toner powder. This will enable you to obtain the best
"yield" from your toner cartridge.
Only use genuine original consumables to ensure the best quality and performance from
your hardware. Non original products may adversely affect your printer's performance and
invalidate your warranty.
R
EPLACING CONSUMABLE ITEMS
T
ONER CARTRIDGE REPLACEMENT
To avoid toner wastage and possible toner sensor errors, do not
change the toner cartridge(s) until "TONER EMPTY" is displayed.
The toner used in this machine is a very fine dry powder. It is contained in four cartridges:
one each for cyan, magenta, yellow and black.
Have a sheet of paper handy so that you have somewhere to place the used cartridge while
you install the new one.
Dispose of the old cartridge responsibly, inside the pack that the new one came in. Follow
any regulations, recommendations, etc., which may be in force concerning waste recycling.
If you do spill any toner powder, lightly brush it off. If this is not enough, use a cool, damp
cloth to remove any residue.
Do not use hot water, and never use solvents of any kind. They will make stains permanent.
If you inhale any toner or get it in your eyes, drink a little water or
bathe your eyes liberally in cold water. Seek medical attention
immediately.
1.
Pull the lever (a) firmly to release the lock and then gently raise the scanner (b).
CAUTION!
WARNING!
Maintenance > 121
Advertisement
Table of Contents
