Service Maintenance Menu - Oki MC560 MFP CX2032 Service & Troubleshooting Manual

Indication of printed page counters
This self-diagnosis is practiced to indicate the current number of printed pages of the printer.
1. Activate the normal self-diagnostic mode, and press and hold down the [MENU+] key or [MENU-] key, until
"PRINTER STATUS" appears in the display section, and then, press the ENTER key. (The MENU+ key
increments a test item, and the MENU- key decrements a test item.)
2. Pressing the [MENU+] key or [MENU-] key causes the current number of printed pages to be displayed
sequentially. (ONLINE and CANCEL keys inactive to pressing)
3. Press the [BACK] key to terminate the test. (Status of Item 1 restored)
Display Upper Display Lower
K-IMPRESSIONS ********IMAGES
Y-IMPRESSIONS ********IMAGES
M-IMPRESSIONS ********IMAGES
C-IMPRESSIONS ********IMAGES
TOTAL SHEET CNT ********PRINTS
Service Maintenance Menu/Adjustments
Factory/Shipping switching
This self-diagnosis is practiced to switch the PU(PRF) PCB between the Factory mode and the Shipping mode.
1. Activate the self-diagnostic (Level 1) mode, and press and hold down the [MENU+] key or [MENU-] key, until
the following message appears.
2. Pressing the [ENTER] key causes the following message to appear. Press and hold down the [MENU+] key or
[MENU-], until the intended item (See the table below) is displayed.
3. Pressing the [ENTER] key while the desired set item remains displayed selects the set value.
4. Pressing and holding down (3 sec) the [ENTER] key while the value you want to set remains displayed
registers the currently displayed value on the EEPROM. Then, the status of Item 2 will be restored.
5. Repeat Items 2 to 4, as needed.
6. Press the [BACK] key to terminate the test. (The status of Item 1 is restored.)
Format Unit
DEC Images
DEC Images
DEC Images
DEC Images
DEC Prints
Function
The printing number of sheets of each
color.
The indication of the total printing number
of sheets
33