Configuration Tab - Toshiba e-studio 452 Printing Manual

5 Printing from Windows
3) [Run Font Manager]
Click this to run the Font Manager. This is not available if the Font Manager is not installed.
The [Run Font Manager] button is not displayed for the PCL6 printer driver.

Configuration Tab

The Configuration Tab allows you to configure options. When any optional unit is installed in this
equipment, set the configuration of the machine on this tab.
When using Windows Vista
In order to open the Fonts tab, right-click the printer icon and select [Run as administrator].
Then enter the administrator's password of the client computer to operate with an administrator's
privilege.
1) Model Selection
This sets the model name of the equipment.
2) Automatic Duplexing Unit (e-STUDIO282 Series Only)
This sets whether or not the optional automatic duplexing unit is installed.
- None — Select this when the automatic duplexing unit is not installed.
- Installed — Select this when the automatic duplexing unit is installed.
3) Drawers
This sets whether or not the optional drawers or LCF is installed.
The selections vary depending on the equipment model.
For e-STUDIO452 Series:
- Drawer 1 & Drawer2 — Select this when the Drawer 1 and Drawer 2 are installed.
- Drawer 1,2 & LCF — Select this when the Drawer 1, Drawer 2 and LCF are installed.
- Drawer 1,2 & Drawer3 — Select this when the Drawer 1, Drawer 2 and Drawer 3 are
installed.
- Drawer1,2 & Drawer3,4 — Select this when the Drawer1, Drawer2, and drawer3,
Drawer4 are installed.
For e-STUDIO282 Series:
- Drawer 1 — Select this when the Drawer 1 is installed.
246 Setting Up Print Options
1
2
3
4
5
6
7
8
9