Configuring The Print Queue - Toshiba e-studio 452 Printing Manual

4 Installing Client Software for UNIX
4
Copy the TAR file onto the root.
A TAR file for each operating system is included in following folders:
For Solaris: [CD-ROM]/Admin/SolarisFilter/Usa/
For HP-UX:[CD-ROM]/Admin/HP-UXFilter/Usa/
For AIX:[CD-ROM]/Admin/AixFilter/Usa/
For Linux: [CD-ROM]/Admin/LinuxFilter/Usa/
For OpenUNIX: [CD-ROM]/Admin/OpenUnixFilter/Usa/
5
Change to the root directory.
6
Enter the following command:
For Solaris:
tar xvf solaris.tar
For HP-UX:
tar xvf hpux.tar
For IBM AIX:
tar xvf aix.tar
For Linux:
tar xvf linux.tar
For OpenUNIX:
tar xvf openunix.tar
7
The command extracts all the required files and installs them in the
correct locations. Continue the procedure for configuring the print
queue.
P.180 "Configuring the Print Queue"

Configuring the Print Queue

After you copy UNIX Filters, you can configure the print queue.
There are two ways to configure the print queue: one is creating a print queue using estbwadd,
and the other is creating a print queue manually without using estbwadd.
P.180 "Creating a Print Queue Using estbwadd"
P.181 "Creating a Print Queue Manually"
— Creating a Print Queue Using estbwadd
You can create a print queue using estbwadd.
Creating a print queue
1
Log on to the root account.
180 Setting Up the UNIX Filters