Duty Cycle; Memory Configuration; Available Memory Options - Toshiba e-STUDIO 20CP Service Manual

Table of Contents

Advertisement

Time to first print from power saver mode:
Note: All first copy times are measured for 2400 image quality, simplex printing on letter-
size paper, The test job consists of the character "A" followed by a form feed (single-page
job). The first copy time is defined as the elapsed time from hitting enter on the PC
keyboard to the page exiting to the output bin. All tests will pick paper from the primary
input tray and the page will exit into the primary output bin.
Processor

Duty Cycle

Memory Configuration

DRAM Memory
Standard
Maximum

Available Memory Options

Optional 64MB, 128MB and 256MB SDRAM DIMMs are available from Toshiba. The
memory options for the 20CP printers are 168-pin synchronous DRAM DIMMs (dual in-
line memory modules).
Flash Memory Options
Additional memory may be required for printing complex pages or full-page, high-
resolution images in 1200 image quality at rated speeds.
1-8
Service Manual
Black: <180 seconds
Color: <180 seconds
350 MHz
Up to 60K page maximum one-time usage
Up to 4K pages per month average usage
Memory slots for extra flash or DRAM: 2
Expansion slots for optional interface cards: 1
Code expansion slots (application solution firmware cards): 1
On-board hard disk interface (for optional hard disk): 1
5060-XXX
Toshiba
20CP
64MB
512MB

Advertisement

Table of Contents
loading

Table of Contents