Internet Connection - Toshiba e-studio 452 Printing Manual

2 Installing Client Software for Windows
This equipment can be used with an SMB printer connection that allows you to connect to this
equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the
common method used to set up the printer. However, SMB printing is not suitable for printing a
large amount of documents.
P.64 "Installing Client Software for SMB Printing"
It assumes using SMB printing in a small network. If you can use the Windows NT 4.0, Windows
2000, Windows XP, Windows Server 2003, or Windows Vista as a print server, it is recom-
mended to set up for printing via Windows print server. For further information about setting up
printing via a Windows print server, see the Network Administration Guide.

— Internet Connection

Available for:
If you print to this equipment over the Internet, you can use IPP printing under Windows 2000,
Windows XP, Windows Server 2003, and Windows Vista. This allows you to print to this equip-
ment from anywhere on the Internet.
P.92 "Installing Client Software for IPP Printing"
To print with an IPP connection, this equipment must be configured to enable the IPP Print
Service and must be connected to the Internet. Ask your administrator if the IPP Print Ser-
vice is enabled.
You can also perform Email printing over the Internet. For more information about Email
printing, please refer to the following section.
P.340 "Email Printing"
24 About the Installation
Windows 2000, Windows XP, Windows Server 2003, Windows Vista
Connecting over Internet
Setting up the IPP
printer connection
Windows 2000
Windows XP
Windows Server 2003
Windows Vista